2024 Columbia Vehicle Group Inc. Expediter 3-wheel

Information

2024 Columbia Vehicle Group Inc. Expediter 3-wheel

THE EXPEDITER IS YOUR TOP-PERFORMING PRODUCTIVITY PARTNER, GETTING YOU WHERE YOU’RE GOING QUICKLY AND SAFELY.

Its narrow design, tight turning radius and best-in-class capacity rating enables you to transport passengers and payload through tight spots and right up to the job site. The standard fold down seat back converts the Expediter into a two-person transport, making it a versatile solution capable of pulling double duty at your facility. Available options and custom services allow us to match just the right Expediter to your specific requirements.

Features may include:

  • Three or four-wheel models available
  • Horn
  • Built-in, 110/240VAC charger
  • Available Tool Express maintenance package
  • Fits through standard 30 inch doorway
  • Highly maneuverable
  • Integral tow hitch receiver
  • Class H motor insulation

Photos

Highlights

  • El Cajon, California
  • 2024
  • Columbia Vehicle Group Inc.
  • Expediter 3-wheel
  • Body: 14-gauge powder coated structural steel smooth plate body
  • Available
  • Step: 7.75 in. | Load Bed: 24 in.

Specifications

  • 2024
  • Columbia Vehicle Group Inc.
  • Expediter
  • 3-wheel
  • Industrial
  • 24 Volt, NEMA class H temperature-rated, separately excited | Braking Mode: Regenerative and accelerator pedal proportional
  • Directional: Fully electronic direction switching with console mounted selector switch
  • 5.2 HP at 875 RPM
  • Max Forward: 9 MPH
  • Four 6 volt, 232 amp hour, 122 minute, deep-cycle | Controller: Programmable, solid state, reduced speed reverse with diagnostic LED & calibrator interface | Controller Rating: 300 amp
  • Built-in, micro-processor controlled, fully sealed, global, 110 - 240 VAC, 50/60 HZ
  • 25 miles
  • Unit/Differential: Automotive style, helical gears in oil bath, direct-to-motor
  • Loop tiller control bar, steering wheel option, T-Bar control option
  • Body: 14-gauge powder coated structural steel smooth plate body
  • Heavy duty welded steel chassis with 14 gauge structural steel smooth plate body
  • Rear suspension, coil springs with shock absorbers
  • Auto-adjusting, mechanical rear drum
  • Foot parking brake
  • 4.80” x 8” 4-ply rated, load range B
  • 4.80” x 8” 4-ply rated, load range B
  • Step: 7.75 in. | Load Bed: 24 in.
  • 4 in.
  • 127 in. Curb-to-curb | 66 in. Intersecting aisle
  • 1 or 2
  • Rated: 750 lbs.
  • Up to 1,000 lbs
  • 855 lbs.
  • Brake, head and tail light option
  • Voltage: 24 Volt
  • Accessories: Horn, battery discharge indicator, reverse warning alarm, driver seat power interlock switch, composite deck board with high-density polyethylene overlay
  • Black vinyl with fold-down backrest